SPE Carolinas Sponsors cover a wide range of
industries as well as corporate size. Sponsors provide the added
resources needed for excellent service to SPE Carolinas members.
|
Sponsor
|
Description
|
Contact
|
 |
A leading supplier of thermoplastics resin with
30 stocking locations and 10 repacking plants across the US, Canada
& Mexico. Representing 21 different resin manufacturers/compounders
and stock all types of resins from commodities to engineered
materials
|
Michael Ellison
Michael.Ellison@polyone.com
Phone:336.937.2141
|
|
|
Custom
compounder with global capabilities,NA mfg Knoxville, TN. Customer
driven custom compounding covering all major engineering resins and
additives.
|
Tom Drye
TDrye@techmerPM.com
Phone:
704.947.7183)
|
|
In the year of 1962, when rheology was an unknown quantity,
GOETTFERT delivered its first Melt Indexers and Capillary
Rheometers. Today we are one of the leading manufacturers of
rheological testing equipment for thermoplastic, thermosetting
plastics and rubber. |
Tim Haake
tim@goettfert.com
Phone: 803-324-3883
|
|
|
A
Niche distributor/broker that covers the East of the Mississippi
River, we are also involved in making color concentrates and
compounded colors as well as other filled type products using talc,
calcium and glass fillers.
|
John
M. Champlin
jchamp@earthlink.net
Phone:
919.422.4249)
|
|
|
A
second-generation, family-owned metalworking company, combining the
traditional strengths of our craft—quality, reliability and
service—with state-of-the-art technologies, local and global
manufacturing resources, and best practices in business management.
|
David
Bowers II
david.bowers2@jmmoldsouth.com
Phone:
864.855.0450)
|
|
|
PolyOne
is the world's largest polymer service company, providing customers
with a single source for polymer, colorant and additives products.
|
Steve
Alderfer
steve.alderfer@polyone.com
Phone:704.641.6321)
-
|
 |
PCE
is a not-for-profit organization created by the state of North
Carolina to assist the plastics industry in the following:
Plastics Training,
Troubleshooting,
Plastic
Material Property Testing: We have a fully
equipped material testing laboratory to test plastic properties and
composition.
Extrusion Compounding:
Our twin-screw extrusion lines can compound research and
pilot-plant quantities of specialty plastic compounds to your
specification.
Injection Molding:
We can do molding trials and small-quantity moldings on our
injection molding machine.
|
Dennis Hayford
dlhayford@polymers-center.org
Phone: 704-602-410 |
|
|
M.
Holland was founded in 1950 by Marvin Holland, as a compounder and
evolved into a full service stocking distributor.
M. Holland strives for excellence in all its endeavors.
|
John
C. Magnus
jmagnus@m-holland.com
Phone:
704.880.2000)
|
|
|
PMW
has been providing quality heavy gauge thermoforming and plastics
fabrication products since 1979. Our major customers represent a
who's who of industry leaders in the fields of transportation,
telecommunications, heavy equipment, consumer and medical products.
|
Wayne Day
wayne@pmwproducts.com
Phone:
919.779.4400)
|
 |
Nexeo Solutions (an independent company formed from the Distribution
Division of Ashland Inc) is focused exclusively on the business of
connecting producers and customers of chemicals, plastics,
composites and environmental services. |
Wayne Simon
wlsimon@nexeosolutions.com
Phone: 704.541.5997 |
 |
XALOY serves the plastics injection and extrusion industry by
offering the highest quality in barrels, high performance screws,
pre-assembled plasticating systems, front end components, heat
transfer rolls, melt pumps, screen changers, pelletizers and
cleaning ovens. |
Steve Jackson
s.jackson@us.xaloy.com
Phone:630-842-3920 |
 |
Breen Color provides colorant solutions for the plastics industry
worldwide. Offering a full line of standard colors and additives, as
well as custom formulations and special effects for all processes.
Our foundation is in PVC concentrates, but we also cover the entire
spectrum of polymers, including PE, PP, PS, PC, ABS, engineering
thermoplastics, Nylon, and TPE/U’s |
Eric Kalis
ekalis@breencolor.com
Phone: 704.607.1022 |
 |
A full service Injection Molder and Contract Manufacturer of
precision components and assemblies. Services: Product Development
through Assemblies and Product Fulfillment, Strategic locations of
the manufacturing allow low cost development and manufacturing,
along with efficient and economical logistical support on delivering
product to market. |
Steve Rammrath
srammrath@syrplasnc.com
Phone: 910.352.5319 |
 |
A leading color concentrate producer for nearly a half-century,
manufacture colorant for all plastic processes other than film and
work with every major polymer system except urethane.
Provide chemical analysis of products, including quantitative
analysis of UV stabilizers, anti-oxidants, lubricants and fillers on
both concentrates and parts. |
Craig Brooks
BrooksC@carolinacolor.com
Phone: 704.607.7931 |
 |
Resin Distribution Inc. was founded in 2003 - Since its inception,
RDI has grown rapidly into a company with national sales coverage.
Headquartered in Ayer, Massachusetts, RDI’s product list includes
the commodity resins, engineering resins, filled products, color
concentrates and custom compounded produc |
Rick Nash
fwnash@sc.rr.com
Phone:
803.333.0212 |
 |
AE
Plastics, Extrudes: profile, tubing and pipe using ABS, High Impact
Polystyrene, Flexible and Rigid PVC, Nylon, High and Low Density
Polyethylene, Polypropylene, Polycarbonate, Acrylic, CAB/ Butyrate,
Thermoplastic adhesives,
Elastomers and most other
thermoplastics |
Greg Whitson
Greg@aeplastics.com
Phone:336.274.113 |
 |
CE-Tech is comprised of industry consultants with over 35 years of
international management experience in Chemical, Plastics and Rubber
Technology, Product Development, Plastics Processing, Tooling Design
and Construction and Procurement.
Our Mission is to assist our clients in meeting their plastic
material technology needs through:
innovative application of materials analysis, development;
application of a proven procurement process for driving cost
savings. |
Ken Morris
kmorris@ce-technologies.com
Phone: 704.644.3789 |
 |
PSI, founded in 2000 as a privately owned company, is a leading U.S.
supplier of
Screen Changers,
Extrusion Gear Pumps
and
Static Mixers
for the Extrusion, Polymer Processing, and Recycling Industries.
Products offered either as stand-alone components or as
complete engineered systems.
PSI utilizes the latest technology in design, engineering, and
process solutions to provide products with superior life under the
most extreme process conditions. |
Brian Woodcock
bwoodcock@psi-polymersystems.com
Phone: 828.468.2600 |
 |
AIM
has the expertise to
design, manufacture and deliver
plastic injection molded
parts to your specifications on-time, every time. AIM’s
molding machines vary in size from 50-ton 1oz to 500-ton and
up to several pounds with High Speed Robotics available. Specialize
in tight tolerance parts requiring very precise quality control
measures to general plastic parts that need to be molded at a great
price. Flexibility is what helps us to grow and to deliver high
quality parts time after time. We offer a full design and CNC
machining facility on site.
We are ISO 9001:2008 and use UL as our registrar.
|
Greg Whitson
Greg@aimolding.com
Phone: 336.274.1131 |
